Lens Hood for Panasonic LUMIX DMC-LX100, DMC-LX100II and LEICA D-LUX (Typ 109), D-LUX 7

Mdl#LH-43LX100 Sku#47316

BUY NOW!

JJC LH-43LX100 Screw-in Lens Hood is designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. The non-glare matte finish on the inside further prevents or limits lens flare. No vignetting will show with the hood on. The hood allows you to put on a Ф43mm filter and a Ф43mm lens cap. With the extended lens end, you will also benefit from extra protection from accidental impact. JJC LH-43LX100 Lens Hood is compatible with Panasonic LUMIX DMC-LX100, DMC-LX100II and Leica D-LUX (Typ 109), D-LUX 7 cameras.

Product Highlights

Blocks stray light from entering the lens

Allows putting on a Ф43mm filter and a Ф43mm lens cap

Non-glare matte finish prevents reflections

No vignetting will be caused with the hood on

Extra protection from accidental impact

Compatible with

Panasonic LUMIX DMC-LX100, DMC-LX100II

Leica D-LUX (Typ 109), D-LUX 7

Weight	Net Weight（g）		12g
	Gross Weight（g）		25g
Size	Full Size		656415mm
	Package	Packaging type	Carton
		Packing size	1188622mm
Material			Metal
Compatible Cameras:			Panasonic LUMIX DMC-LX100, DMC-LX100II Leica D-LUX (Typ 109), D-LUX 7

Please offer this item on Amazon.ca in Canada. I tried to purchase it from Amazon.com and it will not ship outside of the USA.B. Wilson

JJC: Dear Client, This item is not available on Amazon.ca at this moment. But you can purchase this product at EBAY.USA. I think they will offer a good service. Here is the link: http://www.ebay.com/itm/Lens-Hood-for-Panasonic-LUMIX-DMC-LX100-LEICA-D-LUX-Typ-109-Fits-43mm-Lens-Cap-/181762550499?

Can I put a filter on the hood and use a lens cap as well all at the same time?Luther

JJC: Yes, the hood allows you to use a lens cap and a filter, both are 58mm, at the same time.

When the camera sensor is set at 16:9 aspect ratio while the lens is at maximum wide angle, 25mm focal length, is there any vignetting under those conditions?JG

JJC: The LH-43LX100 will not cause vignetting, thank you.

Do U sell it with a protection cup?Marek

JJC: The hood is compatible with a 43mm center pinch snap-on lens cap. What’s more, it provides an additional thread for you to add a 58mm filter or a 58mm lens cap. You can buy a lens cap separately.

Does the lens fully retract with the hood screwed on?Paolo

JJC: Yes, the hood will not affect the extend and retract of the lens.

Category